The application options of our steamers or steam cleaners are multiple and, in addition to cleaning, steam also offers extraordinary services for ironing and textile preservation. Discover here the multiple applications of steam and be surprised by the wide variety of options:

Kills Bed Bugs using Steam Cleaner

**Clean Tile Floor and Grout using Steam Cleaner

**

For maintenance cleaning or final cleaning, use a cloth that will bend and place a brace on the floor nozzle. For a thorough cleaning, you can also use the microfiber cloth (special accessory).

Drag the nozzle from one place to another quickly after releasing the steam, which will allow you not to have to add steam permanently. To clean the joints, you not only have to move the nozzle transversely, but also move it on purpose 

diagonally once in the joint.

Aspiration:

Before steam cleaning, it is recommended to run the vacuum cleaner on the floor. In the case of laminate floors, work them only when you are sure that they have been placed and glued by specialized professionals.

**Steam clean your Laminate

floor **

With half the flow of steam, you can also clean laminated or varnished parquet (without oils or waxes). The steam flow is regulated in the steam gun. Work with two cloths (= four layers) so that as little steam as possible comes directly into contact with the surface. Do not stay for a long time with the spray nozzle at the same point to prevent the soil from becoming too wet. The low residual humidity dries quickly and without leaving marks.

Advice:

Before steam cleaning, it is recommended to run the vacuum cleaner on the floor. In the case of laminates, work them only when you are sure that they have been placed and glued by specialized professionals.

Sanitize and Disinfect bathrooms and toilets

Glowing in the blink of an eye: for cleaning tiled walls, glossy glass surfaces, faucets, joints, crevices, etc.

Soap and lime residue

With the abrasive cloth (microfiber cloth kit for the bathroom) you can effortlessly remove even the embedded soap and lime residue.

Faucet cleaning

• To avoid scratching the chrome and stainless steel faucets, use only the concentrated jet nozzle. Keep it very close to the object you want to clean and wait until the lime has come off. If it remains very embedded or is at an awkward point, the nozzle can be equipped with a brush. Then clean the point by rubbing with the strong steam impulse. Faucet cleaning.
• If the grease film has already a while, it will not get rid of having to constantly rub and squeeze. To do this, always use steam.
• Gradually, the fat is impregnated in the cloth. Therefore, you will have to change the cloth from time to time.
• For a result without marks, review the cleaned surface with the yellow microfiber cloth.
• With direct vaporization and rapid scrubbing movement, even the most embedded dirt can be released.
• The thicker layers of lime should first be sprayed with vinegar or citric acid and let the substance act.
• By the way, periodic vaporization prevents the formation of lime debris in the future.

Window and Mirror Steam cleaning

1. Before using a steam cleaner for the first time, perform a thorough cleaning: with the manual nozzle and the steam cloth, clean the glass completely. Winter tip: if the crystals are very cold, preheat them at a distance of about 5 cm.
2. Then with the concentrated jet nozzle, vaporize the glass surface from top to bottom.
3. Then, with the brush remove the “steam water” in several strips down. To avoid streaking, dry the rubber lip occasionally with a cloth.
4. Do not worry if when you go through the glass with the rubber lip there are still drops of water on the surface. You can remove them with the cloth very easily and without wires.

**Cleaning of tile joints using Steam

1. For a specific cleaning of the joints, the concentrated jet nozzle is suitable, to which a round brush can also be attached.
2. With direct vaporization and rapid scrubbing movement, even the most embedded dirt can be released.
3. After steam cleaning, the surface is dried with a cloth. Warning on silicone gaskets: steam them briefly to protect the material.

Elimination of fat deposits using steamer

1. Stainless steel is in fashion, but it’s only pretty without grease films. In this sense, you can achieve especially good results with the soft velvet and plush cover and the yellow microfiber cloth (special accessories) of the kitchen microfiber cloth kit.
2. If the grease film has already a while, it will not get rid of having to constantly rub and squeeze. To do this, always use steam.
3. Gradually, the fat is impregnated in the cloth. Therefore, you will have to change the cloth from time to time.
4. For a result without marks, review the cleaned surface with the yellow microfiber cloth.

**Steam Clothes using Steam Irons

With the additional nozzle for clothes, refreshing clothes is sewing and singing. With the integrated pedestal remover, you can remove hair and lint from clothing without effort. The wrinkles of the curtains and the clothes are smoothed very easily, without having to place them on the ironing board. Smells are also removed reliably. A real relief!